Power Mac G5 (2005)
Available Memory Modules from Monster Memory and More
512MB PC2-4200 (533MHz) DDR2 w/ECC 240pin DIMM ( Part# x64722125I)
1GB PC2-4200 (533MHz) DDR2 w/ECC 240pin DIMM (Part# x12722125L)
2GB PC2-4200 (533MHz) DDR2 w/ECC 240pin DIMM (Part# x25722125L)
512MB PC2-4200 (533MHz) DDR2 240pin DIMM ( Part# x64642125I)
1GB PC2-4200 (533MHz) DDR2 240pin DIMM (Part# x12642125L)
2GB PC2-4200 (533MHz) DDR2 240pin DIMM (Part# x25642125L)
Technical Specs from Apple
Configuration Options
| |
Power Mac G5 Dual 2GHz (M9590LL/A) |
Power Mac G5 Dual 2.3GHz (M9591LL/A) |
Power Mac G5 Quad 2.5GHz (M9592LL/A) |
| Processor |
Dual-core 2GHz, PowerPC G5 |
Dual-core 2.3GHz, PowerPC G5 |
Two dual-core 2.5GHz PowerPC G5 |
| Memory |
512MB of 533MHz DDR2 SDRAM (PC2-4200); supports up to 16GB |
512MB of 533MHz DDR2 SDRAM (PC2-4200); supports up to 16GB |
- 512MB of 533MHz DDR2 SDRAM (PC2-4200); supports up to 16GB
|
Processing
Single 2GHz, single 2.3GHz, or dual 2.5GHz dual-core PowerPC G5 microprocessors
PowerPC processor architecture with 64-bit data paths and registers; each core includes:
1MB on-chip L2 cache running at processor speed (total 2MB per processor)
Parallel data structure supporting up to 215 simultaneous in-flight instructions
Simultaneous issue of up to 10 out-of-order operations
Dual-pipeline Velocity Engine for 128-bit single-instruction, multiple-data (SIMD) processing
Two independent double-precision floating-point units
Advanced three-component branch prediction logic
Native support for 32-bit application code
Single 1GHz, single 1.15GHz, or dual 1.25GHz 64-bit DDR bidirectional frontside buses
Point-to-point system controller
Memory
128-bit memory controller and data paths
512MB of 533MHz DDR2 SDRAM (PC2-4200)
Eight DIMM slots supporting up to 16GB of main memory
Support for the following DIMMs (in pairs):
256MB DIMMs (64-bit-wide, 512-Mbit)
512MB DIMMs (64-bit-wide, 512-Mbit)
1GB DIMMs (64-bit-wide, 512-Mbit or 1-Gbit)
2GB DIMMs (64-bit-wide, 1-Gbit)
ECC memory available in configurations with 1GB or more (build-to-order option)
|